Sub Transmission Mode
147
2
Stamp
When sending a fax document using the ADF, the machine can stamp a circle
mark at the bottom of the original.
When sending a two-sided document, the document is marked at the bottom of
the front page and top of the rear page.
Important
❒
The optional ADF is required to use this function. Stamp only works when
scanning from the ADF.
A
Place the original, and then select the scan settings you require.
B
Press
[
Sub TX Mode
]
.
C
Press
[
Stamp
]
, and then press
[
OK
]
.
To cancel the stamp, press
[
Stamp
]
again before pressing
[
OK
]
.
D
Specify the destination, and then press the
{
Start
}
key.
