Ricoh 3500P, Printer Reference, Page: 44 / 158

Preparing the Machine
36
1
O
Configure the user code as necessary.
For an RPCS printer driver, a user code can be set after the printer driver in-
stallation. For information about user code, see the printer driver Help.
P
Select the [ Default Printer ] check box to configure the printer as default.
Q
Click [ Continue ] .
The printer driver installation starts.
R
After the installation is completed, select one of the options to restart the
computer either now or later, and then click
[ Finish ] .
Restart the computer to complete installation.
Note
❒
To stop installation of the selected software, click
[ Cancel ]
before installa-
tion is complete.
❒
Auto Run may not work with certain operating system settings. In that
case, launch “Setup.exe” on the CD-ROM root directory.
Reference
A message appears if there is a newer version of the printer driver already
installed. If there is, you cannot install the printer driver using Auto Run.
If you still want to install the printer driver, use
[ Add Printer ]
. See “When a
Message Appears during Installation of the Printer Driver”, Trouble
Shooting.