Ricoh 3500P, Printer Reference, Page: 39 / 158

Installing the Printer Driver
31
1
J
Click [ Port: ] , and then click [ Add ] .
K
Click [ Standard TCP/IP Port ] , and then click [ OK ] .
Configure the Standard TCP/IP port settings, and then see Windows Help if
[ Standard TCP/IP Port ] does not appear.
L
Click [ Next > ] in the [ Add Standard TCP/IP Printer Port Wizard ] dialog box.
M
Enter the printer name or IP address in the [ Printer Name or IP Address ] box.
The [ Port Name ] text box automatically obtains a port name. Change this name
if necessary.
When the device selection appears, select “RICOH NetworkPrinter Driver C
Model”.
N
Click [ Next > ] .
O
Click [ Finish ] in the [ Add Standard TCP/IP Printer Port Wizard ] dialog box.
The installation start dialog box reappears.
P
Check that the port of the selected printer is displayed in [ Port: ] .
Q
Configure the default printer as necessary.
R
Click [ Continue ] .
The printer driver installation starts.
S
After the installation is completed, select one of the options to restart the
computer either now or later, and then click
[ Finish ] .
Restart the computer to complete installation.
Note
❒
To stop installation of the selected software, click [ Cancel ] before installa-
tion is complete.
❒
Auto Run may not work with certain operating system settings. In that
case, launch “Setup.exe” on the CD-ROM root directory.
Reference
A message appears if there is a newer version of the printer driver already
installed. If there is, you cannot install the printer driver using Auto Run.
If you still want to install the printer driver, use
[ Add Printer ] . See “When a
Message Appears during Installation of the Printer Driver”, Trouble
Shooting.