Ricoh 3500P, Printer Reference, Page: 28 / 158

Preparing the Machine
20
1
F
Select the machine model you want to use in the [ Select Printer ] dialog box.
For network connection via TCP/IP, select the machine whose IP address is
displayed in
[ Connect To ] .
For parallel connection, select the machine whose printer port is displayed in
[ Connect To ] .
G
Click [ Install ] .
The printer driver installation starts.
H
Click [ Finish ] .
A message about restarting the computer appears. Restart the computer to
complete installation.
I
Click [ Exit ] in the first dialog box of the installer, and then take out the
CD-ROM.
Note
❒
To stop installation of the selected software, click [ Cancel ] before installa-
tion is complete.
❒
Auto Run may not work with certain operating system settings. If this hap-
pens, launch “Setup.exe” on the CD-ROM root directory.
❒
Select a machine to whose IP address is displayed in [ Connect To ] to install
SmartDeviceMonitor for Client when using TCP/IP.
Reference
Quick Install is not available unless bidirectional communication between
the machine and computer is enabled via parallel connection. See p.53 “If
Bidirectional Communication Is Disabled” for details about bidirectional
communication between the machine and computer.