Ricoh 161, Function Manual

Page: 51 / 192

Specifying a Destination
43
1
Entering a pause
Press the
{
Pause/Redial
}
key when dialing or storing a number to insert a pause
of about two seconds.
Note
❒
If you press the
{
Pause/Redial
}
key at the first digit, the Redial screen appears.
❒
A pause is shown as a “-” on the display.
❒
You can also program numbers including pauses in the destination list.
Entering a tone
This function allows a machine connected to a pulse dialing line to send tonal
signals (for example if you want to use a special service on a tone dialing line).
When you press
[ Tone ] , the machine dials the number using tonal signals.
This section explains how to use the tone function with On Hook Dial as an example.
A
Press the
{
On Hook Dial
}
key.
ASO027S
ASO028S