Ricoh 161, Function Manual, Page: 48 / 192

Transmission
40
1
Note
❒
If the other party's machine does not support the resolution at which you
are sending, this machine automatically switches to a resolution that is
supported. You can check the resolution at which you actually sent by
printing the Journal.
❒
The machine supports reception at both Standard and Detail resolution.
❒
When using Internet Fax transmission, documents are sent at “Detail” res-
olution, even if you have specified “Fine”. To send a document at “Fine”,
configure the Full Mode when registering the destinations in the Address
Book.
Reference
p.32 “T.37 Full Mode”
p.141 “Printing the Journal”
Image Density (Contrast)
Adjust the image density for scanning originals.
Use the
{
Image Density
}
key to vary the image density within 5 levels.
A
Press the
{
Lighter
}
or
{
Darker
}
key to change the density from five density
level.
Each key press moves the indicator one place.
ASO026S