WAKE ALARM CLOCK DIGIAL RADIO
4
5
MODEL: RR40
Parts
1. NFC chip
2. MODE button
3. PRESET button (BACKWARD
button in Bluetooth mode)
4. ALARM button
5. BACK button (FORWARD button
in Bluetooth mode)
6. MENU / INFO button
7. VOLUME button / Scroll /
SELECT rotary dial
8. POWER button
9. SNOOZE/SLEEP button
10. TUNE button (PLAY/PAUSE
button in Bluetooth mode)
11. Antenna
12. USB output (5V/2A)
13. Headphone jack (3.5mm)
14. Audio-IN (AUX IN)
15. DC input (5V/3A)
Packing List
1 x Wake DAB/FM Digital Alarm Clock Radio
1 x DC Power supply adapter
1 x Instruction manual
Standby mode
When the power is connected for the first time, the radio
will enter standby mode.
Display will show the ‘
Time is not set
’ and the clock will
flash ‘
00:00
’
Turning you radio on for the first time
When the radio is switched on for the first time it will
automatically go into DAB mode.
The radio will display ‘
Scanning
’ on the screen and a bar
will show the scanning progress. The number on the right of
scanning shows how many channels are found.
DAB radio mode
In this mode, the radio receives a digital signal and displays
information about the radio station, music title, etc.
1. Press <POWER> to turn on. Then press the <MODE>
button to select ‘DAB MODE’ on the display.
Note
: If no DAB reception is currently available, change
the position of your device or adjust the aerial. Press
and hold the <MENU / INFO> button to enter the menu.
Turn the rotary button to select ‘Full scan’ and press the
<SCROLL/SELECT> button to confirm, this will start a
new search.
2. In DAB mode, turn the rotary button to navigate rough
the available DAB channels. First press the ‘TUNE’
button, and turn the rotary dial to select a channel from
the list, press the <SCROLL/SELECT> dial to confirm.
3. Short press the <INFO> button for more information
about your DAB station. Information such as:
• DLS (Dynamic Label
Segment) – scrolling text
• Signal Strength
• PTY (Programme Type)
• Ensemble
• Frequency
• Signal quality
• Bitrate codec
• Time
• Date
