Richter SAFERUN Installation And Operating Manual Download Page 27

Page: 27 / 76

Layout and function

ID-No. 9230-070-en

Version 1.14 (2019-05)

Page 27

3.4

Scope of delivery

The unit can be supplied with pump or individually.

NOTE

When ordering you can specify whether the converter

SAFERUN

® CMS-T is to be delivered with short or long

sensor cable. Standard fitted with a short cable, con-

verter

SAFERUN

® CMS-T on pump.

3.4.1

Pump with converter SAFERUN® CMS-T

Richter-pump from the Series MNK with can

SAFERUN

® CMS-S

Converter

SAFERUN

® CMS-T with short sensor cable (0.3 m)

Installation and operating manual pump
Installation and operating manual

SAFERUN

3.4.2

Converter SAFERUN® CMS-T without pump

NOTE

On delivery of the converter

SAFERUN

® CMS-T without

pump, the pump must already be equipped with the

can

SAFERUN

® CMS-S.

■

Converter

SAFERUN

® CMS-T with short sensor cable (0.3 m)

■

Installation and Operating Manual

SAFERUN

NOTE

By default, the converter

SAFERUN

® CMS-T is supplied

with short sensor cable (0.3 m).
When ordering you can specify whether the converter

SAFERUN

® CMS-T has to be delivered with a long sen-

sor cable (5 m).

When ordering the Commission number xx-xxxxxx-xx-

xx of the pump must be specified.

Summary of Contents for SAFERUN













































































Search results

Summary of Contents for SAFERUN

Reviews:

Richter SAFERUN, Installation And Operating Manual, Page: 27 / 76

Search results

Summary of Contents for SAFERUN

Reviews: