Richter SAFERUN CMS-S, Installation And Operating Manual

Page: 68 / 106

Dismantling, storage and disposal
Page
68 Version 02 (2020-04) ID No. 9230-020-en
8.3 Disassembly
Disassemble the SAFERUN
®
CMS-T converter as follows:
Switch off the power supply and secure it to prevent it being
switched back on.
Disconnect the supply cable and secure and isolate the open ends
to prevent a short circuit.
Disconnect the sensor cable.
Unscrew the SAFERUN
®
CMS-T converter from the retaining plate.
8.4 Storage
If the device is not required for a longer period of time, clean the
SAFERUN
®
CMS-T converter as described in the Cleaning section.
Store the SAFERUN
®
CMS-T converter and all accessories in a dry,
clean and frost-free place.
8.5 Returning the SAFERUN
®
CMS-T converter
When returning the SAFERUN
®
CMS-T converter for repair or
inspection, please enclose an as detailed as possible description
of the error.
8.6 Disposal
This device is governed by the WEEE directive 2002/96/EC and
national laws. Send the device directly to a specialized recycling
company and do not use community refuse disposal points for
this.
Proper disposal avoids harming people and the environment,
and enables valuable raw materials to be reused.
Materials: see “ Technical data ” section