Richter RSS/F Series, Installation And Operating Manual

Page: 4 / 30

Series RSS/F
Page 4
9560-010-en Revision 19
TM 10477 Edition 05/2022
1.1 Name plate, CE and body
markings
The stainless steel name plate is undetachably
riveted to the body.
If the operator attaches his identification, it must be
ensured that the valve matches the application in
question.
Example of type plate with CE marking:
No CE marking is permissible for the sizes 15, 20 and
25;
the name plate therefore has no CE marking.
Example: Name plate for control data
If heavy-duty bellows are installed, another name
plate indicates this:
HD - BVA = Heavy-duty bellows with support rings
of stainless steel
HD - BKo = Heavy-duty bellows with support rings
of PTFE/carbon
Body identification :
The following are visible on the body according to
DIN EN 19 and AD 2000 A4:
♦
Nominal size
♦
Rated pressure
♦
Body material
♦
Manufacturer's identification
♦
Melt number/Foundry identification
♦
Cast date
♦
Arrow for direction of flow
1.2 Screw-in tools for seats
Nominal size
Article No.
[mm] [inch]
15, 20
½“, ¾“
9568-96-1011
25
1“
9568-96-1001
40
1½“
9568-96-1002
50, 65
2“
9568-96-1003
80
3“
9568-96-1004
100
4“
9568-96-1005
150
6“
9568-96-1013
1.3 Tightening torques
All screws greased, tighten in diametrically
opposite sequence!
The tightening torques for pipe screws and body
screws mentioned must not be exceeded. For an
exception, see
Section 8 , Flange connection
valve/pipe is leaking.
The following tightening torques are recommended.
Pipe screws , flanges to ISO/DIN
Flange
Nominal
size
screws Tightening torque
[mm] [ISO/DIN] [Nm] [in-lbs]
15 4 x M12 6 55
20 4 x M12 8 70
25 4 x M12 10 90
40 4 x M16 20 175
50 4 x M16 26 230
65 4 x M16 40 355
80 8 x M16 25 220
100 8 x M16 35 310
150 8 x M20 65 575
Pipe screws , flanges to ASME Class 150 or flanges
ISO/DIN drilled to ASME Class 150
Flange
Nominal size
screws Tightening torque
[mm] [inch] [ASME] [Nm] [in-lbs]
15
½“ 4 x ½“
5 45
20
¾“ 4 x ½“
6 55
25
1“ 4 x ½“
8 70
40
1½“ 4 x ½“
15 135
50
2“ 4 x ⅝“
25 220
65 --
4 x ⅝“
30 265
80
3“ 4 x ⅝“
45 400
100
4“ 8 x ⅝“
35 310
150
6“ 8 x ¾“
80 710
9 5 0 0 -4 3 -1 0 9 3 .4 -0 0 .1