background image

7

 

MODEL: RR20

  

NOTE

: If no DAB stations are found after auto scan the unit will 

enter the Tune Select Menu. Try changing the location of the radio 

and extend or adjust or the antenna. Rotate the dial to select “Full 

Scan” or “Manual Scan” and rescan.

•  To repeat an Auto Scan press and hold 

MENU/SCAN

 button until 

the display shows “

Scanning ………

” together with a progress bar 

that indicates the progress of the scan and the number stations that 

have been found so far.

DAB Auto Scan

: A full auto scan will search the entire DAB Band for 

all available stations. 

3. DAB Manual Tune

As well as Auto Scan, Radio Station Frequencies can be manually 

selected. You can manually tune to a particular channel/frequency, 

and you will need to know the missing radio station Frequency to 

complete a Manual tune. 
•  Quick press the 

MENU/SCAN

 button to enter Station scan mode 

and then press the dial to confirm, rotate the dial to select “

Manual 

tune

” mode and then press to confirm.

•   Rotate the dial to cycle through the DAB Channels/Frequencies, 

which number from 5A to13F.

•  After your desired channel number is selected, press the dial to 

enter the current multiplex, it will now display the multiplex and 

below you will see the signal strength.

Note:

 You will not see any new radio stations or hear anything while 

in manual tune. To find the newly tuned station search through the 

station list.

Summary of Contents for RR20

















Reviews: