background image

Declaration about the Contamination of 
Richter Pumps, -Valves 
and Components 

Prepared: 

CRQ/Lam

on:

 

Feb. 15, 06

Page:

 2

QM

 

No.: 

0912-16-2001_en/4-

06

Approved:

 CRQ/Zu

on:

 Feb. 

15, 

06

of

 

:

2

The repair and/or maintenance of pumps, valves and components can only be implemented if a completely filled out 
declaration is available. If this is not the case, delay of the work will occur. If this declaration is not attached to the 
devices, which have to be repaired, the transmission can be rejected. 

Every aggregate has to have it’s own declaration.

This declaration may be filled out and signed only by authorized technical personnel of the operator. 

Contractor/dep./institute : 

Reason for transmitting       

Please mark the applicable 

Repair:

subject to fee

Warranty

Street : 

Exchange:

 

subject to fee

Warranty

Postcode, city: 

Exchange/ Replacement already initiated/received

Contact person: 

Return

:

Leasing 

Loan

for credit note

Phone : 

Fax : 

End user

 :

A. Details of Richter-product:

Failure description: 

Classification:
Article number: 

Equipment: 

Serial number: 

Application tool: 
Application process: 

B. Condition of the Richter-product:

no

1)

 

yes 

  no 

Contamination : 

  no

1)

 yes 

Was it in operation ? 

toxic

Drained (product/operating supply item) ? 

caustic

 

All openings hermetically locked! 

inflammable

Cleaned ? 

explosive

2)

If yes, with which cleaning agent: 

mikrobiological

2

)

and with which cleaning method: 

radioactive 

3)

1)

if "no", then forward to

 D

.

other pollutant 

2)

Aggregates, which are contaminated with microbiological or explosive substances, are only
accepted with documented evidence of an approved cleaning.

3)

 

Aggregates, which are contaminated with radioactive substances, are not accepted in principle.

C. Details of the discharged materials (must be filled out imperatively)

1.

With which materials did the aggregate come into contact

 ?

 

Trade name and/or chemical

designation of operational funds and discharged materials, material properties, e.g. as per
safety data sheet (e.g. toxic, inflammable, caustic)

X

Trade name: 

Chemical designation: 

a)
b)
c)
d)

no yes 

2.

Are the materials specified above harmful to health ?

 

3.

Dangerous decomposition products during thermal load ?

 

If yes, which ones ?

D. Mandatory declaration:

We assure that the data in this explanation are truthful and complete and as a signatory I am

able to form an opinion about this. We are aware that we are responsible towards the contractor for damages, which results
from incomplete and incorrect data. We commit ourselves to exempt the contractor from claims for damages of thirds
resulting from incomplete or incorrect data. We are aware that we are directly responsible towards thirds, irrespective of this
declaration, which belongs in particularly to the employees of the contractor consigned with the handling repair of the product.

Name of the authorized person 
(in block letters):

 

Date

Signature

Company stamp 

Summary of Contents for NK/F series











































Reviews: