Beijing RichAuto S&T Co., Ltd.
Forging ahead and determined to win 51
2)
The machine is equipped with C.A.D(Tool sensor)
Firstly, get in ―SYSTEM SETUP-Function Confi-ToolSet‖,choose Atuo.
Press
“
”
+
“
”
,switch to spindle 1
，
and then press
“
”
+
“
”
，
system will automatically move Z axis to the surface of C.A.D(Tool sensor),after touching the
surface,system will automatically switch to spindle 2
，
repeat the same operations to calculate all
offsets.
After calculating all offsets
，
choose anyone of the spindles to set work origin,also press
“
”
and
“
”
to confirm work origin.System will automatically confirm the work
origin of the other spindles according the offsets.
2.
Cylinder Delay
：
Unit
：
ms
（
MACHINE SETUP
）
Time of waiting cylinder rising or falling finished.
7.5
G code example
T1
（
Switch to spindle 1
）
T2
（
Switch to spindle 2
）
M03
(
Spindle 1 CW
)
M03
(
Spindle 2 CW
)
G00 X20 Y20 Z0 G00 X2 Y2 Z0
G01 X20 Y20 Z-2 G01 X2 Y2 Z-2
G01 X120 Y20 Z-2 G01 X12 Y2 Z-2
G01 X120 Y120 Z-2 G01 X12 Y12 Z-2
G01 X20 Y120 Z-2 G01 X2 Y12 Z-2
G01 X20 Y20 Z-2 G01 X2 Y2 Z-2
G00 Z20 G00 Z20
G00 X20 Y20 G00 X2 Y2
M05
（
Spindle 1 Off
）
M05
（
Spindle 2 Off
）
T3,T4 same as T1,T2, the last line of the program can choose to write M30-- end of
program,and return to program top
