1
1
1
1
1
1
1
2
6
2
2
18
8
6
6
1
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
37XA5627
37XA5402-----LX
KMS600W-CS01
KMS600W-CS02
62KMS600AQ101
KMS600W-CS03
17C17A1306001Y3
17C33A0703001Y4
17C33A0712001Y4
17C33A0714001Y4
17FA05040301-Y4
17D03A030301-Y4
18000337004
4
18000337004---SM
BACK ASSEMBLY
SEAT ASSEMBLY
LEFT LEG
RIGHT LEG
LEG BRACE
SUPPORT
SCREW ST4.2*16
BOLT M6*12
BOLT M6*35
BOLT M6*40
WASHER d6.5*D13*1.0
JAM NUT M6*1.0
BOLT CAP
BOLT CAP(BLUE)
PARTS LIST
PAGE 1 OF 3
V-3
COURTYARD CREATIONS INC.
PART
NO.
MATERIAL CODE
PART
Q’TY
PART
NO.
MATERIAL CODE
PART
Q’TY
FIGURE 1
ASSEMBLY INSTRUCTIONS
ATTENTION: THIS PRODUCT IS NOT FOR COMMERCIAL USE
INTENDED FOR RESIDENTIAL USE ONLY.
KMS600Z
Use the correct bolts as indicated. Do not tighten any of the bolts until the chair is completely assembled.
Do not discard of any of the packaging until you have checked that you have all of the parts and fittings
required.
Keep children away during assembly. This item contains small parts that can be swallowed by children.
Children should always be under direct adult supervision while using this product.
Retain these assembly instructions for future reference.
Quote the following FQC No. when contacting the service center.
SERVICE CENTER TOLL FREE NO.
TEL: 1-877-539-7436
FAX: 1-877-539-7439
!
!
!
!
!
18000319005
2
18000319005---SM
17KAA0101----Y4
17KAC3101----Y3
HEX. KEY WRENCH 4MM
NUT WRENCH 10MM
NUT CAP M6
NUT CAP M6(BLUE)
Attention:
Make sure that each bolt needed for all steps matches
the corresponding figure to ensure proper assembly.
You will need the following tools:
- Phillips Screwdriver (Not included)
- Hex. Key Wrench (See Part #17)
- Nut Wrench (See Part #18)
Step 1:
Insert the leg brace (#5) into the left leg (#3) and right
leg (#4). Fasten them together by using screws (#7).
See Figure 1.
7
L
3
5
4
R
Note:
The labels marked “L” and “R” on the legs (#3 and #4)
should coincide with Figure 1 to ensure proper assembly.
STOP
DO NOT RETURN TO THE STORE!
