Rice Lake TA Plus 124, Operation Manual

Page: 66 / 80

60 Visit our website www.RiceLake.com
TA Plus Balance
7.5 Command Formats
Do not confuse the alphabetical O for Arabic number 0 (Zero).
C1 C2
Code
（
C1)
Code
（
C2)
Description
Response
A00/Exx
format
ACK/NAK
format
T (SP)
0x54
0x20 Tare A00:
Normal
response
E01:
Abnormal
response
ACK:
Normal
response
NAK:
Abnormal
response
Z (SP) 0x5a 0x20 Zero-point adjustment
O 0 0x4f 0x30 Stop output
O 1 0x4f 0x31 Continuous output
O 2 0x4f 0x32 Continuous output (no output when unstable)
O 3 0x4f 0x33 Press output key for one-time output
O 4 0x4f 0x34 Auto output
O 5 0x4f 0x35 One-time output when stable
O 6 0x4f 0x36 One-time output when stable
O 7 0x4f 0x37 Press output key for one-time output when stable
Commands O0 to O7:
• Have the same functions as the output control set by the setting menu
• Once commands are executed, that state is maintained; the status is reset to the setting menu when the balance is
turned on again
O 8 0x4f 0x38 One-time output
O 9 0x4f 0x39 One-time output after stability is obtained
Command O8 to O9:
• Are used to request data from the balance
• After the command is executed, it returns to O0
O A 0x4f 0x41 Interval function (Output each time the output time has elapsed)
O B 0x4f 0x42 Interval function (Output when stable each time the output time
has elapsed)
When OA or OB command is sent, the interval function starts and must be sent again to end the function
Table 7-6. Zero Point Adjustment/Tare/Output Control Setting Command
C1 C2 Code (C1) Code (C2) Description Response
D D 0x44 0x44 Date output request Date data
D T 0x44 0x54 Time output request Time data
Table 7-7. Data Output Request and Time Output Request
IMPORTANT