Introduction
© Rice Lake Weighing Systems
●
All Rights Reserved
1
1.0
Introduction
The SURVIVOR® RL1700 HE Weigh Module
Kit is ideally suited for light to medium capacity
micro-ingredient batching and mixing in a
variety of hostile environments, especially
where moisture is present. The load cell is
stainless steel and hermetically sealed with an
IP rating of IP68 to provide superior corrosion,
moisture ingress, and mechanical protection.
The RL9018SS and RLHTO load cells are
each waterproof guaranteed and OIML C3
certified (20kg-5,000kg) to offer the ultimate in
durability and accuracy in any environment.
An important feature of the RL1700 HE is that the load may be checked
in one of two directions. This allows positioning in one of two orientations
for proper checking.
Integral jacking/shipping bolts offer a means to remove the load from the
load cell for quick removal and replacement of a load cell and worry-free
transport. The load introduction mechanism also isolates the load cell
from side loads, overloads, and underloads. For reliability and accuracy, the RL1700 HE is the
perfect mounting assembly for light capacity weighing.
The RL1700 HE modules are available from 5-250kg (11-550lb) capacities using RL9018SS
cantilever beam load cells. In capacities from 500-5,000kg (1,100-11,000lb), the units use
RLHTO single-ended shear-beam load cells.
The installation should be planned by a qualified structural engineer. Each installation is
unique, and this manual is meant to serve only as a general guideline for installation.
Manuals and additional resources are available on the Rice Lake Weighing Systems
website at
Warranty information can be found on the website at
or
