Rice Lake REVOLUTION 682 Synergy Plus, Technical Manual

Page: 57 / 130

Configuration
© Rice Lake Weighing Systems ● All Rights Reserved 49
4.5.8.1 If Kind = Gross, Net, Negative Gross, Negative Net, Positive Relative, Negative Relative, Percent Relative
Figure 4-22. Setpoints Parameter Group A
4.5.8.2 If Kind = Accumulate, Delay, Wait Standstill, Auto-Jog, Time Of Day
Figure 4-23. Setpoints Parameter Group B
Setpoint
Configuration
Batching Batching
Setup Tare User
Setpoint Digital I/O Stream Format
Setpoint 1 Setpoint 2-8 Setpoint 8
Alias
Push Tare Clear Tare Push Print Push Accumulate
Preact Kind Value Band Value Trip Hysteresis
Clear Accumulator Alarm Preact Adjust (%)
Preact Stability
(seconds)
Relative Setpoint
Number
Preact Count Preact Value
Digital Output
Slot
Sense Digital Output
Branch Batch Enable Access Alias
If Trip = Inband
or Outband
If Trip = Higher
or Lower
If Preact =
On or Learn
If Preact = Learn
Based on Digital I/O
set as Output
If Batch = On
If Kind = Positive Relative,
Negative Relative or Percent Relative
Setpoint
Configuration
Batching Batching
Setup Tare User
Setpoint Digital I/O Stream Format
Setpoint 1 Setpoint 2-8 Setpoint 8
Alias
Branch Digital Output Batch Sense
Duration Kind Value Band Value Trip Time
Digital Output
Slot
Push Tare Clear Accumulator Clear Tare Push Print Push Accumulate Alarm
Enable Alias Access
If Trip = Inband
or Outband
If Kind = Accumulate,
Delay or Wait Stanstill
If Kind =
Accumulate
If Batch = On, and
Kind = Accumulate
If Kind = Accumulate
or Time Of Day
If Kind = Accumulate
or Delay
If Kind =
Accumulate
If Kind = Time Of Day