682 Synergy Plus
38
Visit our website
4.5.4.2 USB Menu
This section provides a flow chart and descriptions for the USB menu.
Figure 4-12. USB Menu
Table 4-11. USB Menu Parameters
Parameter
Description
Trigger
Sets the input trigger type;
Settings:
Command
(default)
– Sets input trigger to command; allows operation of EDP commands and can print
Stream Industrial
– Scale data is updated up to configured sample rate; allows operation of EDP commands and printing
Stream Legal For Trade
–
Scale data is updated at configured display update rate; allows operation of EDP commands and
printing
Remote
– Configures the port to operate as a serial scale input
Line Terminator
Sets the termination character for data sent from the port;
Settings:
CR/LF
(default), CR
End of Line Delay Sets the delay period from when a formatted line is terminated to the beginning of the next formatted serial output (0.1-second
intervals);
Enter value: 0–255,
0
(default)
Echo
Specifies if characters received by the port are echoed back to the sending unit;
Settings:
On
(default), Off
Response
Specifies if the port transmits replies to serial commands;
Settings:
On
(default), Off
Trigger
Line Terminator
End of Line Delay
Response
USB
Ethernet
Serial
Setup
Tare
User
Communications
Calibration
Program
Echo
Response
Summary of Contents for REVOLUTION 682 Synergy Plus
Page 129: ......
