680 Synergy Plus – Digital Weight Indicator
16
Visit our website
3.3.2 Alphanumeric Entry
Several parameters in the menu structure require the entry of an alphanumeric value rather than the making of a selection.
The end of the alphanumeric character string is indicated by the “
_
.
” character symbol.
Follow this procedure to enter an alphanumeric value:
1. Press
or
to enter into the parameter. The current parameter entry displays.
2. Press
or
to move to the character to be edited.
3. Press
to enter into the character options for the location at the far right of the display.
4. Press
or
to scroll through available character or use the numeric keypad to enter in the ASCII value of
the intended character (
).
5. Press
to select the currently displayed character. The selected character displays in the second display field.
6. Press
to enter into the character options again for the next character.
7. Press
again or press
to clear the current character.
8. Repeat the previous steps until alphanumeric entry is complete.
9. Press
to save the new entry.
Press
to leave the parameter without saving the changes.
3.4 General Indicator Operation
Basic 680 operations are summarized below.
3.4.1 Zero Scale
1. In gross mode, remove all weight from the scale and wait for the
LED to light.
2. Press
. The
LED lights to indicate the scale is zeroed.
The scale must be stable and within the configured zero range for the scale to be zeroed. If the scale cannot be
zeroed, see
3.4.2 Toggle Units
Press
to toggle between primary and secondary units. The current unit LED is lit.
3.4.3 Toggle Gross/Net Mode
Net mode is available when a tare value has been entered or acquired (Net = Gross minus Tare). If tare has not been entered
or acquired, the display remains in gross mode. The LED above Gross or Net indicate the current mode.
Press
to toggle the display mode between gross and net.
3.4.4 Acquire Tare
1. Place a container on the scale and wait for the
LED to light.
2. Press
to acquire the tare weight of the container. The net weight displays and the Net LED and
T
LED light,
confirming the tare value was entered.
Note
Note
Note
