Introduction
© Rice Lake Weighing Systems
●
All Rights Reserved
3
1.3 Display and Keypad
The display is a backlit, transflective LCD which provides excellent readability from full sunlight to total darkness. The
alphanumeric section prompts the operator through setup and calibration.
Figure 1-1. Display Feature and Keys
1.3.1 Keyboard Features
Silicon elastomeric rubber switches provide up to 10 million operations which are far more rugged than mechanical switches
which can withstand excessive impact without affecting operation
Rubber membrane provides watertight and salt spray-proof seal. Additional poly-shield on underlay provides second layer of
integrity and prevents humidity contamination
Item No.
Description
1
Motion Icon – Indicates there is motion on the scale
2
Motion Indicator – Indicates there is motion on the scale
3
Negative Symbol – Indicates a negative value
4
Center Of Zero Icon – Indicates the center of zero
5
Low Battery Icon – Indicates if the battery has low power
6
Infrared Remote On – Indicates the function is on
7
Digit Weight – 6 max
8
Character Message Display – 8 max, prompts the operator through setup and calibration
9
Auto Total On – Indicates the function is on
10
Units – Indicates unit of measure for weight displayed; lb, kg, t, METRIC t
11
Power – Turns power on/off; Prompts user to zero the initial deadload
12
Zero – Zeros the scale, zero range depends on standard
13
Net/Gross – Toggles weight between net and gross when a tare is in place
14
Tare In/Out – In
GROSS
mode, selecting
TARE
zeros weight on the scale which causes the scale to go into the NET mode;
When in
NET
mode, selecting
TARE
clears the
TARE
value and the scale reverts to the
GROSS
mode
15
Test – Causes a display segment check, provides battery and RCAL tests
Table 1-1. Display Features and Keys
T
0
ZERO NET/GROSS TARE
T
S
E
T
R
E
W
O
P
IN / OUT
11
12
13
14
15
7
10
8
1
2
3
4
5
6
9
