Good
Solder
Coverage
2
920i Battery Pins Soldering Instructions
Figure 4. Desired solder applied to top battery pin
Exposed
Pin
Figure 5. Inadequate solder covering on top battery pin
5. To apply solder to the battery pin, select a soldering iron with a tip approaching the width of the pin.
6. Use the soldering iron to heat up the battery pin. Then, apply solder to the pin so that it melts in an even,
overall coverage pattern.
Figure 6. Use the soldering iron to heat up the pin
7. Once the appropriate amount of solder has been applied to both pins and has cooled, insert the battery and
power up the 920i indicator. The “
Low Battery
” warning should no longer appear.
8. If the “
Low Battery
” warning is still present, contact RLWS service.
