Introduction
1
1.0
Introduction
The
DIGI DSX-1000
is an economical, high resolution checkweigher that quickly responds to changes in applied
weight and utilizes a splash-proof housing.
Manuals can be viewed and downloaded from the Rice Lake Weighing Systems website at
www.ricelake.com
Warranty information can be found on the website at
www.ricelake.com/warranties
1.1
Safety
Important
CAUTION
WARNING
DANGER
Safety Signal Definitions:
Indicates an imminently hazardous situation that, if not avoided, will result in serious injury or
death. Includes hazards that are exposed when guards are removed.
Indicates a potentially hazardous situation that, if not avoided could result in serious injury or
death. Includes hazards that are exposed when guards are removed.
Indicates a potentially hazardous situation that, if not avoided, could result in minor or
moderate injury.
Indicates information about procedures that, if not observed, could result in damage to
equipment or corruption to and loss of data.
General Safety
WARNING
Do not operate or work on this equipment unless this manual has been read and all instructions are
understood. Failure to follow the instructions or heed the warnings could result in injury or death.
Contact any Rice Lake Weighing Systems dealer for replacement manuals.
Failure to heed may result in serious injury or death.
Ensure every individual who operates or works with this unit has read and understands the following safely information.
Important
Do not allow minors (children) or inexperienced persons to operate this scale.
Prior to cleaning, make sure the scale is disconnected from the power source.
Do not use near water.
Do not drop the scale or subject it to violent shocks.
Do not use this product if any of the components are loose or cracked.
Do not use in the presence of flammable materials.
For accurate weighing, the scale must be placed on a flat, level surface.
Operating at voltages and frequencies other than specified could damage the equipment.
Avoid contact with excessive moisture.
Do not make alterations or modifications to the scale.
