Operation
17
4.0
Operation
4.1
Zero Setting
1. Power the scale on and wait for it to stabilize.
and
are displayed.
2. Place a weight on the scale. The weight and
are displayed.
1. Press
. The scale briefly displays
888888
then returns to zero.
and
are displayed.
2. Remove the weight.
UF
is displayed.
3. Press
. The scale briefly displays
888888
then returns to zero.
and
are displayed.
Note
If the weight is within the available range of zero resetting, the weight returns to zero. If the weight is out of the
available range of zero resetting, the weight remains on the display and an alarm beeps.
4.2
Tare Setting
Note
If a manual tare is entered, it is not possible to access the digital tare function.
If a digital tare is entered, it is still possible to access the manual tare function and the two different types of
tare are added. If
is pressed, both the manual tare and the digital tare are cleared.
All manual and digital tare values are lost when the instrument is powered off.
4.2.1
Manual Tare
1. Power the scale on and wait for the scale to stabilize.
and
are displayed.
2. Place a weight on the scale. The weight value and
are displayed.
3. Press
. The weight value returns to zero.
and
are displayed.
4. Remove the weight. The weight value is displayed as a negative number.
,
and
are
displayed.
5. Press
with no weight on the scale to clear the manual tare. The weight value returns to zero.
and
are displayed.
Note
If the tare weight is within the available range of tare reduction (Table 1-1 and Table 1-2 on page 4), the weight
returns to zero and
displays. If the weight is out of the available range of tare reduction, the weight
remains on the display and an alarm beeps.
4.2.2
Digital Tare
1. Power the scale on and wait for it to stabilize.
and
are displayed.
2. Press
to enter the digital tare mode.
3. Press
to display the digital key pad.
Figure 4-1. Digital Tare Mode Display
