Setup
© Rice Lake Weighing Systems
●
All Rights Reserved
3
2.3 Power
Power the unit
with one of the following sources:
• AC power supply
• USB HID 2.0 powered communications port (can be used as a stand alone device or interfaced to a third-party software
program which recognizes devices following USB HID requirements)
• Four AA alkaline batteries (not included)
Figure 2-2. BP-P Top View with Weigh Platter Removed
Once the scale is connected to a power source, the power LED illuminates. Press
to power on the scale.
2.4 Connections
The USB connection can be used as an HID device or USB power supply. The scale is equipped with a standard bi-directional
RS-232 port for connection to a PC.
Figure 2-3. Junction Box Connections – Back Of Unit
Battery Compartment Screw
Power LED
Adapter
RS-232
USB
Display
