Installation
© Rice Lake Weighing Systems
●
All Rights Reserved
5
2.3 Front Plate Removal
Remove the front plate of the 380 to connect cables and to gain access to the 380 board.
Before opening the unit, ensure batteries are removed and the optional power cord is disconnected from the
power outlet.
1. Place the 380 face-up on an anti-static work mat.
2. Remove the screws holding the front plate to the enclosure.
3. Lift the front plate away from the enclosure and disconnect the ground wire from the front plate.
Figure 2-4. Removing the Front Plate
WARNING
