40
Counterpart Counting Scale Indicator
Regulate Industry Menu
Only displayed if INDUST is selected
from the REGULAT parameter
REGULAT
INDUST
DISPLY
SCALE
SNPSHT
NO
YES
ZTARE
KTARE
YES
NO
CTARE
YES
NO
NTARE
NO
YES
MTARE
REMOVE
REPLAC
NOTHN
NO
YES
PRTMOT
NO
YES
PRTPT
AGENCY
CALIB
SCALE
OVRBAS
NTEP
INDUST
NONE
OIML
CANADA
Figure 3-15. Regulate Industry Menu Layout
CODE
Press CODE, enter ID number, press ENTER to recall stored item code. If item code does not exist, will
prompt “Item not found, Save as New ID?” Pressing YES will store in first available register. Alpha ON/OFF
softkey appears to turn off Alpha to process numbers quicker when not using Alpha.
LOT
Allows user to add lot number to stored item code on the fly (if enabled to do so)
PRINTPLT
Allows user to print a pallet label
SWAPDSP
Allows user to swap large display between weight, count, unit weight
RESET ID’S
Reset or clear ID’s/codes.
IN
Used to add, subtract count from inventory value (local or WeighVault)
OUT
CLRCN
Sets consecutive number back to RESVAL (beginning reset value)
QUANTITY
Update quantity for IN/OUT inventory database.
TOTAL+
Used with totalization mode or parts reduction count mode to add or subtract items from total accumulated
count. CLRTTL will clear the totalized value.
TOTAL-
CLRTTL
UWUPDT
Update stored unit weight or tare weight for currently loaded item code
TAREUPDT
SETPT
Change setpoint value
BATSTRT
Batch start
BATSTOP
Batch stop
BATPAUSE
Pause batch
BATRST
Reset batch
Parameters
Descriptions
Table 3-13. Softkey Menu Parameters
