22
22
G
B
Main power supply 230 Vac 50/60 Hz (120V/60Hz upon request)
Safety strip self-test power 24 Vdc
Accessories power 24 Vdc
Accessories power supply -24 Vdc
Photocells contact (NC)
Safety strip contact (NC)
Single pulse contact (NO)
Pedestrian opening contact (NO)
Common contact (common line for all the command and safety inputs)
Electric lock connection (MAX 15W 12V)
Radio Antenna
Common contact (common line for all the command and safety inputs)
Buzzer contact (24 Vdc max 200 mA)
Gate open state output indicator (24 Vdc 3W max)
Flashing light (max 40W )
MOTOR 2 COMMON CONNECTION
MOTOR 2 PHASE AND CAPACITOR CONNECTIONS
MOTOR 1 COMMON CONNECTION
MOTOR 1 PHASE AND CAPACITOR CONNECTIONS
DO NOT rEMOVE ANY JUMPEr!
OTHErWIsE THE OPErATOr WILL NOT WOrK!
(only CrX control board)
DO NOT rEMOVE ANY JUMPEr!
OTHErWIsE THE OPErATOr WILL NOT WOrK!
Terminal block to connect the heater sensor
only
for operator (code AA14019).
Built-in radio module (model CRX), or connector for radio receiver RIB, 24 Vdc supply
To select 1 motor (M1) or 2 motors (M1 and M2)
Programming button
Electronic torque regulator
Electronic regulator for low speed on approach motor (See chart 1)
J1
J2
J3
J4
J5
J6
J7
J8
JP17
s3
Tr1
Tr2
N -L1
A+ TEST
A +
A -
PHOT. NC
EDGE NC
K BUTT.
PED. BUTT.
COM
LOCK
AERIAL
COM
BUZZER
SIGNAL
U - MOTOR 2
V-W - MOTOR 2
U - MOTOR 1
V-W - MOTOR 1
SW T2
SW RADIO
PROBE
RADIO
PROG
TORQUE
LOW SPEED
POINT A
- CONTrOL PANEL fEATUrEs
TR2
TR1
S3
J8
J5
J3
J7
J2
J4
J1
J6
JP1
JP2
JP3
JP17
ON
