AFTERSALES | helpline:
01405 864994
| email:
| www.
kelkay
.com
AFTERSALES | helpline:
01405 864994
| email:
| www.
kelkay
.com
PUMP FLOW:
The pump fl ow can be adjusted with the regulator, this is found
on the inlet of the pump. We recommend starting with the fl ow
regulator fully open and then adjusting down if required.
Assembly Instructions
Assembly Instructions
Feed the pump wire through the hole in the pedestal and connect it to the transformer.
Feed the pump cable through the hole in the
base and pull through notch in the base.
Wrap rubber stopper around cable and
force down into hole to create a water
tight seal. Add silicone as necessary.
Assemble the bowl with the pedestal in the direction of the arrow and tighten it.
1
4
2
7
3
Connect the light wire and tubing to the
pump. Fill with suffi cient water, ensuring
the pump is fully submerged.
Once switched on, check the water fl ow. If
necessary, level the fountain by placing the
black plastic shims provided underneath the
fountain base. This should ensure an even
water fl ow is achieved.
6
5
44018 RHS Rosemoor User Guide.indd 6-7
03/12/2019 09:38
