Tools Required:
Rubber Mallet or Hammer
1.
2.
3.
4.
Instructions
1
Fix the four corners of the Base Tent to the ground using the metal
pegs.
Item
Component Name
Qty
Part No.
1
Carry Bag
1
-
2
Guy Rope
8
C910
3
Metal Peg
2
C909
4
Telescopic Support Pole
4
-
5
Instructions
1
R662
Telescopic Support Pole
4
31106
Rhino-Rack Sunseeker II Base Tent Stand Alone Fitment (32124)
Hammer the
pegs firmly into
the ground.
2
Insert the Upper Support Poles into
the material tubes on the roof of the
tent.
Note:
Support Poles included in
Base Tent Kit.
3
1: Slide the Base Tent roof
supports through the
material tubes. Use care
when doing so as to not
damage the tent.
2: Slide the Base Tent roof
supports into the plastic
housings on each corner of
the roof.
Insert the Telescopic Poles into the
ring fixture points on the front side of
the tent.
3 Pike Street, Rydalmere,
NSW 2116, Australia.
Document No: R662
(Ph) (02) 9638 4744
Prepared By: Kayle Everett
Issue No: 01
(Fax) (02) 9638 4822
Authorised By: Chris Murty
Issue Date: 27/01/2015
Pole spike
into this
eyelet.
