1) Important Safety Notice!
Make sure you read this section very carefully! Learn to recognize this Safety
Alert Symbol. The APES-14-77 & electric punch has been designed to
provide a very high level of protection to an operator. Follow the guidelines
below while installing, operating and maintaining your machine.
¾
If the machine cycles erratically, call dealer immediately for service.
¾
Never bypass Safety devices.
¾
Turn both power switches off before removing a die or performing
maintenance.
2) Placing the APES-14-77 in the proper location:
Locate a clear work area 48” wide X 30” deep with a duplex outlet within 5 feet that
provides a 15-amp service (16-amp European) which is protected at the customer’s
circuit box. The work area must be a solid and firm cabinet or a heavy duty table with a
flat level surface. Never attempt to move the HD punch with one person! Always
move your HD punch with two people, one on each side. Locate your HD-7700 on
the right side of a 48” wide work area with the chip tray near the front edge of the work
area.
(HD-7000 Shown)
Page 3
Issue “A1” 09/03 P/N 900599 www.RHIN-O-TUFF.com
