9) HD-7700 Removing Punch Pins:
Make sure the machine is turned off before removing the die. To remove a punch pin
from the die, disengage both quick change die handles and slide the die to the right until
the die is completely removed from punch.
Step 1. Remove top pin retainer by pushing down first, and then
pulling away from bottom pin retainer to expose punch pins.
Step 2. Remove desired punch pin.
Step 3. Place edge of top pin retainer along punch pins and press
down while pulling pin retainer back to original position.
Step 4. Install die into machine as described in previous section.
Page 19
Issue “A1” 09/03 P/N 900599 www.RHIN-O-TUFF.com
