Rhima DEKO 25iX, Operator'S Manual

Page: 24 / 40

- 23 -
0DOIXQFWLRQDQGIDXOWV
WARNING situations, which can be controlled by the User, are being indicated as shown below.
If the recommended actions have been taken, press the “CONTINUE” key .
After the fifth indication (door open or lack of chemical) the machine will switch over into FAULT
condition.
Press “CONTINUE” key to confirm the warning message.
Warning messages
Warning text Explanation
Please check water taps are open Comes in the beginning of the cycle without pump pressure.
No disinfection Warns the user, if the cycle does not include disinfection
Cycle nr. xx OK, No disinfection Warns the user, if the cycle did not include disinfection
Loading door is open Loading door open or not closed correctly
Chemical tank 1 empty Replace chemical tank #1
Chemical tank 2 empty Replace chemical tank #2
Rinse aid tank empty Replace rinse aid tank
Periodic service is needed Inform the service to perform periodic service
Power cut off during the cycle There has been a power failure during the last cycle
THE CYCLE MUST BE RUN AGAIN !
Check parameters Call service
Set parameters Call service, machine must be configured
Cycle loading failed Call service
USB memory card is missing Call service
Check SD-memory card Call service
Error while saving a report Call service
Error while printing a report Call service
Transfer of ftp file failed Call service
Parameter of machine type Call service
Internal communication error Call service
Check calibration values Call service
Check machine date and time Call service
PLC and HMI software versions
are not compatible Call service
24