RHG Products Company
Trouble Shooting
Your system comes with a pressure gauge.
The pressure gauge is in place to show you the incoming pressures from
the water supply. The H2Pro performs best at 50 PSI or higher coming
from the water supply. If your pressure is below 50 PSI you will want to
consider a booster pump to increase the pressure coming into the
system.
If you are not getting adequate flow at the brush of your waterfed pole,
check your pressure gauge to see that your incoming PSI is 50 or higher.
If it is, you may have a blockage elsewhere in your set up.
Any alterations to your system will void its
warranty.
