Appendix A: Safety Instructions – Ver. 1.00
32 / 43
For the connection to the cage clamp terminals in the RHE28 the following rules apply:
Conductor cross-section:
0.2 – 2.5mm²
Stripping length:
6 – 9mm
A.8
Electrical connection to RHE
The figure shows the electrical connections between RHM*** -S* or –J* (connection box) and a
RHE28.
For further information regarding the connections, the function of the different signals and
special connections for RHM with fixed cable, please refer to chapter 4 “Electrical Installation”
and to appendix A “Ex-safety instructions” of the RHM manual.
For the connection to the cage clamp terminals in the RHE28 the following rules apply:
Conductor cross-section:
0.2 – 2.5mm²
Stripping length:
6 – 9mm
Summary of Contents for RHE28
Page 27: ...RHE28 Installation Startup Guide Doc No 8 2 1 07 Ver 1 31 27 43 7 Ordering Code ...
Page 39: ...Appendix C CE Certificates 39 43 Appendix C CE Certificates ...
Page 40: ...Appendix C CE Certificates 40 43 ...
Page 41: ...Appendix C CE Certificates 41 43 ...
