MAN1910117 V.7 – 15/11/2012
37
16 Machine out of service
16.1 Temporary out of service
Should a long period be foreseen in which the machine will not operate, the following operations must be carried
out:
Enter in the programming mode (see section "Enter and exit from the programming mode"):
- entering
1
choose the programming sub-menu:
PROGRAMMING
TEMPERATURE
- entering
3
, scroll the functions until the message:
TEMPERATURE
boiler
85
entering
5
set to 0 the temperature value;
- press
1
to confirm the data
Unplug the machine from the electric mains.
Unload all ingredients from the canisters.
Remove and thoroughly clean in hot water all components in contact with foodstuff. The components are indicated
in the part "Maintenance".
For the version without self-water tank close the tap of the external water mains supply and disconnect the water
supply pipe from the machine.
Discharge the whole content of the boiler for instant ingredients by removing the cap from the end of the drainpipe.
Replace the cap on the pipe end. Use the liquid waste disposal bucket as container for the drained water.
Empty and clean the internal liquid waste tray.
Clean the inside and the outside with a damp cloth. Protect the outside of the machine with a piece of cloth or a
plastic film. The machine must be kept in a sheltered place and at a temperature not lower than 5° C
16.2 Definitive out of service
Before carrying out the definitive out of service operation, it is necessary to carry out all operations to
empty the machine of ingredients and water according to instructions given in the above section.
The machine is not made of polluting materials. Therefore, for demolition it is advised to disassemble the
machine by dividing the various components according to the type of material (plastic, metal, paper, etc.).
Especially remove from the electronic board the battery and the waste it in a safety way. The various
components can be then delivered to authorised companies for waste disposal
.
17 Further advice for the user
The automatic vending machine in your hands is safe for those who follow the loading and ordinary cleaning
instructions indicated in this manual. The user must not gain access to areas in the machine, which feature a cover
requiring a tool to be removed.
Some maintenance operations (to be carried out by authorised personnel only) require an intentional bypassing of
safety protections of the machine. Technical qualification, the compliance of maintenance procedures indicated in
this manual and the due care when having access to areas
indicated as dangerous allows operating in a safe way.
The stickers indicating danger are applied on fixed covers and
show the following symbols:
- possible contact with components under voltage;
- possible contact with hot surfaces.
