Thank you for choosing this quality product. Be sure to check all packaging materials carefully for small parts that may have
become loose during shipment and place all parts on a non-abrasive surface.
These bed parts can be cumbersome and heavy
;
the assistance of two or more people is recommended
in
order
to prevent personal injury and ensure the bed parts are not damaged during the assembly process.
PARTS INCLUDED
A [1] HEADBOARD
B [1] FOOTBOARD
C [2] SIDE RAILS
D [1] SUPPORT SLAT
E [3] LEG
F [2] FLAT FORM PANEL
NO. ITEM
DESCRIPTION
QTY.
3
8
pcs.
Threaded
r
od
1
2
4
5
Hex
n
ut
Lock
w
asher
Curved
s
lotted
w
asher
Wrench
6
Screws
8
pcs.
8
pcs.
8
pcs.
1
pcs.
2
pcs.
A
F
B
C
E
D
STEP 2:
Repeat the above procedure with the other side
rail
(C)
to attach it to the
h
eadboard (A)
.
R
epeat to
connect
the
s
ide
r
ails (C) to the
f
ootboard (B).
FIGURE 01
Page 1 of 2
10/1/18
BEZIER SHELTER
BE
D INSTRUCTIONS
STEP 1:
Place the headboard (A) upright in the location
you wish the bed to be in when fully assembled.
The headboard (A) fast hardware should be
facing the inside, toward the mattress. Secure
the threaded rods (1) to the fixed nuts in the
headboard (A) by turning manually. Raise the
side rail (C) up and align the threaded rods (1)
with the bore holes on the end of the side rails
(C). Put the side rails (C) up against the
headboard (A) so the threaded rods (1) go
through the bore holes. Insert the curved slotted
washers (4), lock washers (3) and hex nuts (2)
onto the threaded rods (1). Tighten with the Allen
wrench (5) provided. Refer to FIGURE 01.
