Z O E W R I T I N G D E S K I N S T R U C T I O N S
3
Metal Bracket
4
Clevis Pin
5
6
Hair Pin
Steel Aircraft cable
7
Short Screw
NO.
ITEM
DESCRIPTION
QTY.
Long Screw
2
1
Toggle bolt
2 sets
2 pcs.
2 pcs.
2 pcs.
1 pc
2 pcs.
2 pcs.
PARTS INCLUDED
A [1] TOP
B [4] LEGS
ASSEMBLY INSTRUCTIONS
1. Lay the Top (A) upside down on a soft flat surface.
2. Align and insert the threaded rods of the legs (B) into the fixed nuts at the
bottom of the Top (A), then turn the legs clockwise to tighten. DO NOT OVER
TIGHTEN. See sketch as shown below.
3. Turn the Desk to an upright position.
DRYWALL W/STUDS
DRYWALL W/O STUDS
FIGURE A
FIGURE B
ASSEMBLY INSTRUCTIONS BY WALL TYPE:
• DRYWALL WITH STUDS: Use screws to affix to studs,
and use hollow wall anchors and screws to affix to drywall.
See FIGURE A.
• DRYWALL WITHOUT STUDS: Use toggle bolt and screws
to affix to drywall. See FIGURE B.
TOOLS NEEDED
Phillips Screwdriver
(Not provided)
HARDWARE INCLUDED
A
B
Page 1 of 2
