Screw (3cm)
Allen Key (0.5cm Dia)
1 pc
4 pcs
NO.
QTY
1
2
3
4
ITEM
DESCRIPTION
16 pcs
Allen Head Bolt (0.8cm Dia*3.2cm)
8 pcs
PARTS INCLUDED
ASSEMBLY INSTRUCTIONS
CARE INSTRUCTIONS
A [
1
2 ] SIDE PANEL
B
FRONT PANEL
C
HEADBOARD
D
SLAT
E
TRUNDLE
F
[ ]
1
[ ]
1
[ ]
4
[ ]
2
[ ]
TOOLS NEEDED
Phillips-head Screwdriver (not included)
1.Spot clean only with a soft, damp cloth.
1 of 2
Bed must be assembled by at least two people.
Please read instruction carefully before assembling bed.
Use the above parts and hardware list to identify each component.
Keep all packing materials until assembly is complete to avoid loss of smaller parts.
1. Stand the Headboard (C) upright and hook Headboard (C) into Side Panels(A), as shown in Diagram I.
PLATFORM PANEL
2. Screw the Allen Head Bolts (2) into the Side Panels (A) per-buried holes, then stand the Front Panel (B)
as shown in Diagram II.
then tighten all bolts with Allen Key (1),
upright and attach Side Panels (A),
Screw (4cm)
THALIA TRUNDLE DAYBED TWIN - ASSEMBLY INSTRUCTIONS
3. Place the Slats (E) into the U-Shaped slats support, then screw the ends of the slats to the slats support by using
Screw (3), as shown in Diagram III.
4. Place the Platform Panels (F) on the top of the Slats (D), then tighten the Platform Panels (F) with Slats (D) by
using Screw (4), as shown in Diagram IV.
5. Push the Trundle (D) into the Daybed frame, making sure the Trundle (D) front panel is flush with the Daybed Front
Pane;l (B).
