RIDLEY TASK SCONCE – ASSEMBLY INSTRUCTIONS
PARTS ENCLOSED:
(A) Wall Anchors (2)
(G) ON/OFF Rotating
(B) Mounting Plate (1)
Switch (1)
(C) Wall Screws (2)
(H) Plate Screws (3)
(D) Top Cord Cover (1)
(I) Shade (1)
(E) Plug (1)
(J) LED Bulb (1)
(F) Bottom Cord Cover (1) (K) Shade Joint (1)
(L) Back Plate (1)
RIDLEY TASK SCONCE
Plug-In Installation
IMPORTANT SAFETY INSTRUCTIONS:
The fixture can be used as a plug-in or a fixed unit when used with the appropriate
conversion kit. For your safety, this sconce is equipped with a 3-pronged polarized
plug. If the plug does not fit securely into your outlet, do not force it – contact a
professional electrician. Use the plug with an extension cord only if it can be fully
inserted into the cord's socket. Never alter the plug in any way.
This fixture has been rated for up to (1) 4w max Type T LED bulb (MODEL NO.: T8-4,
included) or (1) 40w max Type T incandescent bulb (not included)
.
To avoid the risk of
fire, do not exceed the recommended wattage.
WARNINGS:
All wires are connected. When unpacking, be careful not to pull wires, as a bad
connection may result. Do not connect electricity until the fixture is fully
assembled. To reduce the risk of fire, electrical shock, or personal injury, always
turn off and unplug fixture and allow it to cool prior to replacing lightbulb.
Do not touch bulb when fixture is turned on or look directly at lit bulb.
Keep flammable materials away from lit bulb.
DO NOT REMOVE THE CARDBOARD INSULATOR SURROUNDING THE SOCKET.
THIS PRODUCT IS NOT A TOY AND HAS NO PLAY VALUE.
WARNING: STRANGULATION HAZARD
PLUG-IN ASSEMBLY INSTRUCTIONS:
1. Carefully remove all parts from the box and remove all plastic coverings.
2. Drill 2 holes in the wall that align with the holes on the mounting plate of the lamp
(B) and insert wall anchors (A).
3. Place mounting plate (B) onto the wall anchors (A), then screw wall screws (C)
into anchors.
4. Attach the back plate (L) to the mounting plate (B) and use the plate
screws (H) to secure.
5. Screw the top cord cover (D) into the hole located on the bottom of the back
plate (L).
6. Screw the bottom cord cover (F) into the top cord cover (D).
7. Insert (1) LED bulb (J) into the threaded socket.
8. Adjust the shade joint (K) to get your desired angle for the shade (I).
9. Insert plug (E) into proper electrical outlet and rotate ON/OFF switch (G) to test
fixture.
CARE INSTRUCTIONS:
To clean, use a soft, dry cloth.
Do not use polishes or cleaners on the fixture.
Keep cord at least 3 feet away from cribs, bassinets, and toddler beds.
Keep out of reach of children under 3 years of age.
