P A R T S I N C L U D E D
A [ 1 ] HEADBOARD
B [ 2 ] SIDE RAIL
C [ 1 ] FOOTBOARD
D [ 4 ] SLAT
E [ 2 ] PLATFORM
A S S E M B LY I N S T R U C T I O N S
Bed must be assembled by at least two people.
Please read instructions carefully before assembling bed.
Use the above parts and hardware list to identify each component.
Keep all packing materials until assembly is complete to avoid loss of smaller parts
1 of 2
Screw(4cm)
Screw(3cm)
1 pc
8 pcs
12 pcs
16 pcs
1
2
3
4
NO.
ITEM
DESCRIPTION
QTY
NO.
ITEM
DESCRIPTION
QTY
1.
Screw the Allen Head Bolt ( 2) to the Headboard ( A ), then stand the Headboard ( A ) upright
and attach Side Rails ( B ), as shown in Diagram I.
2.
Repeat above procedure to attach the Footboard ( C ), then tighten all Allen Head Bolts ( 2 )
with Allen Key ( 1 ).
3.
Attach the Center Foot ( F ) to the Slat ( D ), as shown in Diagram II.
4.
Place the Slats ( D ) on the top of the Side Rail’s side slats and fasten using Screw ( 3 ), as shown in
Diagram III.
5.
Lay the Platform Panel ( E ) on the top of the slats (D), then screw with screw ( 4 ), as shown in Diagram IV.
T O O L S N E E D E D
F [ 4 ] CENTER FOOT ( WITH ADJUSTABLE GLIDE )
KENLIE UPHOLSTERED BED FULL & QUEEN - ASSEMBLY INSTRUCTIONS
Phillps-head screwdriver (not included)
