User Manual
Reference number: 4111A-RADAR4600-GBD-R1.1
Date: 27 February 2018
Page 20 of 149
Click and hold this button to suppress all synthetic lines and symbols of radar
image. They are activated again, when leaving the button.
Bearings can be selected in true or relative.
The combined [EBL/VRM] button gets an active function, when one of the [EBL]
or [VRM] buttons is activated. Then the cursor is dedicated to those selected
function. If the cursor shall be left for basic functions, the [EBL/VRM] button
must be set to Off.
2.2.5
Upper centre line - Range selection
The upper centre field shows range buttons and the range ring On/Off button.
Clicking the arrows, changes to next range.
Click and hold [Range Rings]
to suppress synthetic lines
Clicking the RNG bar, changes the line to single buttons
with adjacent ranges, to select direct one of them.
2.2.6
Menu blocks with info pages and function select
Clicking one of the three topside selector buttons opens a regarding list of targets with alarming state, or
one of two lists with separate selected radar- or AIS targets.
Beside example shows data of two selected tracked targets. (Target no. 2 is associated with an AIS target).
If [AIS] is selected, also ships names are shown.
Ship names are often longer than the column wideness. To get the full name, set the cursor onto the name.
With short delay, the first column is suppressed and both target columns are shown enlarged.
Clicking one of the downside menu buttons*
opens a regarding window with different activation
functions or lists of acquired targets.
2.2.7
Rou
(Example shows menu [TT] with activated sub
menu ‘AIS Targets’, with a list of all received
AIS messages).
