MILA CRYSTAL TABLE LAMP BASE – ASSEMBLY INSTRUCTIONS
Thank you for selecting RH Baby & Child lighting. Our assortment is crafted with the highest
quality materials that coordinate perfectly with our Baby & Child bedding collections, making
it easy to create an elegant nursery or child’s bedroom. The item’s surface is sealed, which
eliminates the need for polishing and ensures a lasting finish for years to come.
PARTS ENCLOSED:
(A) Finial
(B) Harp
(C) CFL Bulb
(D) Socket
(E) Saddle
(F) Lamp base
(G) Rubber feet (4 pcs)
IMPORTANT SAFETY INSTRUCTIONS:
For safety purposes, this lamp is equipped with a polarized
plug (one blade is wider than the other). If the plug does not
fit securely into your outlet, do not force it - contact a
professional electrician. Use the plug with an extension cord
only if it can be fully inserted into the cord's socket. Never
alter the plug in any way. This fixture has been rated for up
to one 13W max CFL bulb (included) or one 60W max Type A
standard bulb. To avoid the risk of fire, do not exceed the
recommended wattage.
WARNINGS:
All wires are connected. When unpacking, be careful not to pull
wires as a bad connection may result. Do not connect
electricity until your lamp is fully assembled. To reduce the
risk of fire, electrical shock, or personal injury, always turn
off the lamp and allow it to cool prior to replacing the
lightbulb. Do not touch bulb when fixture is turned on or look
directly at lit bulb. Keep flammable materials away from lit
bulb.
DO NOT REMOVE THE CARDBOARD INSULATOR SURROUNDING THE SOCKET.
THIS PRODUCT IS NOT A TOY AND HAS NO PLAY VALUE.
WARNING: STRANGULATION HAZARD
Keep cord at least 3 feet away from cribs, bassinets, and
toddler beds.
Keep out of reach of children under 3 years
of age.
ASSEMBLY & INSTALLATION:
1. Carefully remove all parts from the box and remove
plastic covering.
2. Place the lamp base (F) on tabletop carefully.
3. Insert the harp (B) into the saddle (E) .
4. Insert the CFL Bulb (C) or (1) 60W type A bulb into the
threaded socket (D).
5. Attach a shade (sold seperately) to harp and screw on the
finial (A) to secure the shade.
6. Attach rubber feet (G) to the base to protect the tabletop.
7. Plug into proper electrical outlet and test the lamp.
8. Assembly is complete.
CARE INSTRUCTIONS:
Wipe clean with a soft, dry cloth.
Do not use polishes or cleaners, as it may damage the finish.
