background image

Page 4 of 15

Infants have died in toddler beds from entrapment and strangulation.

Failure to follow these warnings and the assembly instructions could 

result in serious injury or death.

NEVER use bed with children under 15 months.

NEVER place bed near windows where cords from blinds or drapes 

may strangle a child.

The mattress intended for use on the bed must be a full-size crib mattress 
having minimum dimensions of 51 5/8  inches (1310mm) in length, 27 1/4 
inches (690mm) in width and 4 inches (100mm) in thickness, not 
exceeding 6 inches (152mm) in thickness.
If guardrails are used as the mattress containment means, guardrail(s) 
provided must be used to avoid the formation of a gap between the 
mattress and the bed that could cause an entrapment.
DO NOT place bed near windows where cords from blinds or drapes 
may strangle a child.
DO NOT place items with a string, cord, or ribbon around a child's neck, 
such as hood strings or pacifier cords.
A child using the toddler or day bed must be at least 15 months of age 
and must not weigh more than 50 lbs (22.7kg).

     WARNING: ENTRAPMENT/STRANGULATION HAZARD

CALLUM CRIB

Summary of Contents for CALLUM 355-46
















Reviews: