RH Baby&child 178 - 1/2 Assembly Instructions Manual Download Page 15 | Manualshive

Page: 15 / 15

RH Baby&child 178 - 1/2 Assembly Instructions Manual Download Page 15

STEP 13: INSTALL BEDDING

Page 15 of 15

Model No: 178 - 1/2

INDUSTRIAL LOCKER TWIN/FULL BUNK BED

UPPER BUNK MATTRESS DIAGRAM

MATTRESS

BEDDING SPECIFICATIONS FOR TOP BUNK:
The following size mattress and Foundation are specified for use with this Bunk bed:

MATTRESS DIMENSION SPECIFICATIONS FOR TOP BUNK
Twin - over - twin bunk: 75" long x 38" wide x 6" thick
Full - over - full bunk: 75" long x 53" wide x 6" thick

MATTRESS DIMENSION SPECIFICATIONS FOR LOWER BUNK
Twin - over - twin bunk: 75" long x 38" wide x 10" thick
Full - over - full bunk: 75" long x 53" wide x 10" thick

PLATFORM :
-Twin - over - twin bunk: Upper bed consists of 2 pcs platform 37 3/4" long x 38 3/4" wide x 3/4" thick & bottom bed consists of
14 pcs slats 38 3/4" long x 2 1/2" wide x 3/4" thick.
-Full - over - full Bunk: Upper bed consists of 2 pcs platform 37 3/4" long x 53 7/8" wide x 3/4" thick & bottom bed consists of
14 pcs slats 53 7/8" long x 2 1/2" wide x 3/4" thick.

**Note: MATTRESS THICKNESS MUST NOT EXCEED MAX 6" FOR TOP BUNK.
Be sure to adhere to these BEDDING SPECIFICATIONS in order to avoid the possibility of falling or entrapment.
THESE SPECIFICATIONS MUST BE STRICTLY ADHERED TO !

5" MINIMUM DISTANCE
FROM TOP OF MATTRESS
TO TOP OF GUARD RAIL

6" MAXIMUM
THICKNESS

SIDE RAIL

PLATFORM

CARE INSTRUCTIONS

Dust often using a clean, soft, dry lint-free cloth.
Blot spills immediately, and wipe with a clean, damp cloth.
We do not recommend the use of chemical cleansers, abrasives, or furniture polish on our lacquered finish.

«
...
13
14
15

Summary of Contents for 178 - 1/2
















Reviews:

No comments