RGBlink VSP3500, User Manual, Page: 89 / 112

6. System Setup and Operations
How to clear layer?
VSP 3500 User Manual 89
How to clear layer?
Firstly, ensure the equipment is on power and run normally. For details,
please refer to: How to determine equipment run normally?
Operation is as follows:
1. In LAYER area, press any key of layer A, B, C, D that need to clear,
key blinks.
2. Press the key again, key light is off, and clear layer finished.
For example, clear layer B, LCD panel shows as follows:
LAYERB OF OUPUT1
：
CLEAR