5.
System setting and operation
How to crop on input pictures
VSP 737 User Manual 62
Firstly assure the device is powered on.
Details are in: How to Confirm the
Device is in Normal Operation.
Key operation is as below: (Factory setting parameter)
1. Tap
2. LCD screen shows:
3.
Tap NEXT, rotate the knob, adjust cropped picture‘s width, tap NEXT to
confirm the adjusting value;
4.
Rotate the knob again to adjust cropped picture‘s height, crop picture X
position and Y position, tap NEXT to confirm;
Note
System default picture start point
（
0
，
0
）
locates at top left corner.
CROP WIDTH B:
>1024
CROP HEIGHT B:
>1024
CROP POS X B:
>0
CROP POS Y B:
>0
