Connections
RJ-45 interface
2
3 4
USB control port
5
CVBS/SDI input (BNC)
18
CVBS input (BNC)
7
8
Power cord connector IEC-3
Turn off or disconnect all equipment power sources.
1
Mini switches
RS232 control port
USB control port of TX card
11
22 23
15
9
DVI input (DVI-I)
VGA input (DB15)
DVI+VGA input (DVI-I)
Signal connection:
1. Input HDMI signal via DVI to HDMI adapter.
2. Input VGA through to DVI to VGA adapter.
3. Input both DVI and VGA signal through DVI
to DVI + VGA adapter.
4. Input DVI, YPbPr or CV through DVI to DVI
+3 BNC adapter.
5. Or input DVI directly by DVI cable.
Through DVI to VGA adapter,
VGA output to VGA monitor, DVI
ouput to DVI monitor or LED
control system
One side of DVI to VGA
adapter is DVI-I male
interface, another side VGA
female interface.
Step 8-DVI+VGA output
Use to input HDMI( from HD player), DVI or
VGA( from computer), YPbPr (from Satellite
Transmission or DVD)
NOTE
One side of DVI to YPbPr
adapter is DVI-I male
interface, another side
YPbPr female interface.
One side of DVI to DVI+VGA
adapter is DVI-I or DVI-D
male interface, another side
DVI-I or DVI-D female
interface.
10
12
16
6 19
LAN RJ-45 port, connect with
LED screen via CAT5 cable.
17
20
DVI output (DVI-I)
21
DVI+VGA output (DVI-I)
26
27
Step 2-CV/SDI input
CV/SDI input composite/3G signal from HD
player or HD camera.
NOTE
(Auto detect composite signal or 3G SDI, 3G
SDI is optional module, VSP 5126 3G is VSP
5162 with 3G SDI module.)
Step 3-Composite input
Step 6-DVI+VGA input
Use to input composite signal
Supported standards: PAL,NTSC and SECAM
Step 4-DVI input
Use to input DVI from DVI player or
computer with DVI connector
Step 5-VGA input
Use to input VGA signal from VGA player
or computer with VGA connector
VSP 5162
–
Quick Start
This guide provides quick start instructions for an experienced installer to set up
and operate the VSP 5162.
For full installation, configuration, and operation details, refer to the
VSP 5162 user manual.
Installation and cabling features
Rear Panel
Step 1-Mounting
VSP 5162 Quick Start
Rev 1.0
Page 1 of 4
TX Card Power Connector
TX Card DVI Input Connector
13 24
14 25
USB input port
28
Step 7 USB Input
Used to play media files from disk with
USB connect.
