RGBlink VSP 198CVS User Manual Download Page 101

Page: 101 / 122

System Setup and Operation

How to Realize Test Pattern Output and Settings

VSP 198CVS User Manual 101

How to Realize Test Pattern Output and

Settings

Test Pattern is used to calibrate the screen or system, especially when

there is not standard input measure instrument.

There are 66 kinds of test patterns for VSP 198CVS. Push the

MENU

button and go into the menu items, turn the knob and go to <SYSTEM>

menu as following:

Push the knob and go into the <SYSTEM> menus. Turn knob and go to

<DISPLAY MODE> menu as following:

Push knob and go into the <DISPLAY MODE> menu. Turn the knob and go

to <FLAT COLOR> or <TEST PATTERN> option.

FLAT COLOR: Push knob and go into the menu, RED color range is from 0

to 255, GREEN is from 0 to 255, and BLUE is from 0 to 255.

ADJUST

》

TEXT OVERLAY

》

->SYSTEM

》

LANGUAGE/

语言

/ ENG

ETHERNET

》

->DISPLAY MODE

》

DELAY CALL 0S
TECH SUPPORT

》

MODE PURE IMAGE
->PURE COLAR

》

->RED                                                            255
    GREEN                                                        255
    BLUE                                                            255

Summary of Contents for VSP 198CVS



























































































































Search results

Summary of Contents for VSP 198CVS

Reviews:

Related manuals for VSP 198CVS

Brands by name

Popular brands

RGBlink VSP 198CVS, User Manual

Search results

Summary of Contents for VSP 198CVS

Reviews:

Related manuals for VSP 198CVS

Brands by name

Popular brands