4.
MENU Orientation
MENU
VSP 168HD User Manual 48
ALPHA:
Image transparency setting, the regulating range is among 0 to
16.
DEINTERLACE:
Force Deinterlace function, can choose
―ON‖ or ―OFF‖.
ON: Force interlace for interlaced signal without effect switching, but with
effects switching for progressive signal.
OFF: No deinterlace, with effect switching.
Choose <SPLIT>, push the knob to confirm, the LCD display show the level
2 menu as following:
SPLIT ON/OFF:
Split function, can choose
―ON‖ or ―OFF‖.
H TOTAL:
The total width points of LED display that will split.
V TOTAL:
The total height points of LED display that will split.
H POS:
The
horizontal position of the device when do split.
V POS:
The vertical position of the device when do split.
H SIZE:
The width of the device when do split.
V SIZE:
The height of the device when do split.
RESET:
If image quality distorts by improper operation, it can be recover by
reset.
SAVE TO:
The device provides ten save modes, users can save the
current operations to SAVE1 to SAVE10.
Note
LOAD FROM:
It can
call the saved user modes via the call save function.
DELAY CALL:
Set delay the output time. When more than one equipment
power on, and the processor is the end equipment in order to improve
question that can
’t identify the input signal and phenomenon that LED
The SAVE button can also achieve this setting.
