Address
：
S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen, Fujian Province, P.R.C
Tel: 00865925771197
Fax: 00865925788216
Email: [email protected]
http://www.rgblink.cn
27
Push the [MENU] button for two times, and enter to the transition function menus, transition menu shown as
follows:
DEINTERLACE:
Force Deinterlace function, select “ON” or “OFF”.
ON: Force deinterlace.
OFF: No deinterlace.
IMAGE ENHANCE:
Image enhancement function, for image edge sharpening, color reduction and image scaling.
MODE:
Special effects switching modes, including DISSOLVE, CUT, WIPE SQUARE IN, WIPE SQUARE OUT, WIPE
TOP LEFT IN, WIPE TOP LEFT OUT, WIPE TOP RIGHT IN, WIPE TOP RIGHT OUT, WIPE BOTTOM LEFT IN, WIPE
BOTTOM LEFT OUT, WIPE BOTTOM RIGHT IN, WIPE BOTTOM LEFT OUT, WIPE LEFT IN, WIPE LEFT OUT, WIPE
RIGHT IN, WIPE RIGHT OUT, WIPE TOP IN, WIPE TOP OUT, WIPE BOTTOM IN and WIPE BOTTOM OUT.
PULL SCREEN:
Enable or disable pull screen function.
FADE TIME:
Switch time setting. Turn the rotary knob to select the fade time and push the knob to confirm. The
switching time ranges from 0 to 3S.
ALPHA:
Set the image transparency, the adjustment range is 0 to 16.
->
DEINTERLACE
ON
IMAGE ENHANCE
OFF
MODE
DISSOLVE
PULL SCREEN
OFF
->
FADE TIME
0.5s
ALPHA
16